document number: 84732 for technical questions, contact: optocoupleranswe rs@vishay.com www.vishay.com rev. 1.5, 08-apr-11 1 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high speed optocoupler, single and dual, 10 mbd 6n137, vo2601, vo2611, vo2630, vo2631, vo4661 vishay semiconductors description the 6n137, vo2601, and vo2611 are single channel 10 mbd optocouplers utilizing a high efficient input led coupled with an integrated optical photodiode ic detector. the detector has an open drain nmos-transistor output, providing less leakage compared to an open collector schottky clamped transistor output. the vo2630, vo2631, and vo4661 are dual channel 10 mbd optocouplers. for the single channel type, an enable function on pin 7 allows the detector to be strobed. the internal shield provides a guaranteed common mode transient immunity of 5 kv/s for the vo2601 and vo2631 and 15 kv/s for the vo2611 and vo4661. the use of a 0.1 f bypass capacitor connected between pin 5 and 8 is recommended. features ? choice of cmr performance of 15 kv/s, 5 kv/s, and 100 v/s ? high speed: 10 mbd typical ? + 5 v cmos compatibility ? pure tin leads ? guaranteed ac and dc performance over temperature: - 40 c to + 100 c temperature range ? meets iec 60068-2-42 (so 2 ) and iec 60068-2-43 (h 2 s) requirements ? low input current capability: 5 ma ? compliant to rohs directive to 2002/95/ec and in accordance weee 2002/96/ec applications ? microprocessor system interface ? plc, ate input/output isolation ? computer periph eral interface ? digital fieldbus isolation: cc-link, devicenet, profibus, sds ? high speed a/d and d/a conversion ? ac plasma display panel level shifting ? multiplexed data transmission ? digital control power supply ? ground loop elimination agency approvals ? ul1577, file no. e52744 system code h, double protection ? cul - file no. e52744, equivalent to csa bulletin 5a ? din en 60747-5-5 (vde 0884) available with option 1 ? bsi iec 60950 1 2 3 4 8 7 6 5 1 2 3 4 8 7 6 5 nc a c nc v cc v e v o g nd a1 c1 c2 a2 v cc v o1 v o2 g nd s ingle channel dual channel 6n137, vo2601, vo2611 vo2630, vo2631, vo4661 18921-30 v de 18921-15 ordering information vo2601-x0##t part number package option tape and reel agency certified/package channels 1 channels 2 cmr (kv/s) cmr (kv/s) bsi, ul, cul 0.1 5 15 0.1 5 15 dip-8 6n137 vo2601 vo2611 vo2630 vo2631 vo4661 dip-8, 400 mil, option 6 6n137-x006 vo2601-x006 vo2611-x006 vo2630-x006 vo2631-x006 vo4661-x006 smd-8, option 7 6n137-x007t vo2601-x007t vo2611-x007t vo2630-x007t vo2631-x007t vo4661-x007t vde, bsi, ul, cul 0.1 5 15 0.1 5 15 dip-8, 400 mil, option 6 - vo2601-x016 vo2611-x016 - - - smd-8, option 7 - vo2601-x017t vo2611-x017t - vo2631-x017t - 10.16 mm > 0.7 mm 7.62 mm dip-8 option 7 option 6
www.vishay.com for technical questions, contact: optocoupleranswe rs@vishay.com document number: 84732 2 rev. 1.5, 08-apr-11 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 6n137, vo2601, vo2611, vo2630, vo2631, vo4661 vishay semiconductors high speed optocoupler, single and dual, 10 mbd notes ? stresses in excess of the absolute maximum ratings can cause pe rmanent damage to the device. functional operation of the devic e is not implied at these or any other conditions in excess of those given in the operational sections of this document. exposure to abs olute maximum ratings for e xtended periods of the time ca n adversely affect reliability. (1) refer to reflow profile for soldering conditions for surface mount ed devices (smd). refer to wave profile for soldering conditi ons for through hole devices (dip). truth table (positive logic) led enable output on h l off h h on l h off l h on nc l off nc h absolute maximum ratings (1) (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit input average forward current (single channel) i f 20 ma average forward current (per channel for dual channel) i f 15 ma reverse input voltage v r 5v enable input voltage v e v cc + 0.5 v v enable input current i e 5ma surge current t = 100 s i fsm 200 ma output power dissipation (single channel) p diss 35 mw output power dissipati on (per channel for dual channel) p diss 25 mw output supply voltage 1 min maximum v cc 7v output current i o 50 ma output voltage v o 7v output power dissipati on (single channel) p diss 85 mw output power dissipati on (per channel for dual channel) p diss 60 mw coupler isolation test voltage t = 1 s v iso 5300 v rms storage temperature t stg - 55 to + 150 c operating temperature t amb - 40 to + 100 c lead solder temperature for 10 s 260 c solder reflow temperature (1) 260 c recommended operating conditions parameter test condition symbol min. max. unit operating temperature t amb - 40 100 c supply voltage v cc 4.5 5.5 v input current low level i fl 0 250 a input current high level i fh 515ma logic high enable voltage v eh 2v cc v logic low enable voltage v el 00.8v output pull up resistor r l 330 4k ? fanout r l = 1 k ? n5-
document number: 84732 for technical questions, contact: optocoupleranswe rs@vishay.com www.vishay.com rev. 1.5, 08-apr-11 3 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 6n137, vo2601, vo2611, vo2630, vo2631, vo4661 high speed optocoupler, single and dual, 10 mbd vishay semiconductors note ? minimum and maximum values are testing requirements. typical values are characteristics of the device and are the result of en gineering evaluation. typical values are for information only and are not part of the testing requirements. notes ? over recommended temperature (t amb = - 40 c to + 100 c), v cc = 5 v, i f = 7.5 ma unless otherwise sp ecified. all typicals at t amb = 25 c, v cc = 5 v. (1) 75 ns applies to the 6n137 only, a jedec registered specification electrical characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol min. typ. max. unit input input forward voltage i f = 10 ma v f 1.1 1.4 1.7 v reverse current v r = 5 v i r 0.01 10 a input capacitance f = 1 mhz, v f = 0 v c i 55 pf output high level supply current (single channel) v e = 0.5 v, i f = 0 ma i cch 4.1 7 ma v e = v cc , i f = 0 ma i cch 3.3 6 ma high level supply current (dual channel) i f = 0 ma i cch 6.5 12 ma low level supply current (single channel) v e = 0.5 v, i f = 10 ma i ccl 47ma v e = v cc , i f = 10 ma i ccl 3.3 6 ma low level supply current (dual channel) i f = 10 ma i ccl 6.5 12 ma high level output current v e = 2 v, v o = 5.5 v, i f = 250 a i oh 0.002 1 a low level output voltage v e = 2 v, i f = 5 ma, i ol (sinking) = 13 ma v ol 0.2 0.6 v input threshold current v e = 2 v, v o = 5.5 v, i ol (sinking) = 13 ma i th 2.4 5 ma high level enable current v e = 2 v i eh - 0.6 - 1.6 ma low level enable current v e = 0.5 v i el - 0.8 - 1.6 ma high level enable voltage v eh 2v low level enable voltage v el 0.8 v switching characteristics parameter test condition symbol min. typ. max. unit propagation delay time to high output level r l = 350 ? , c l = 15 pf t plh 20 48 75 (1) ns t plh 100 ns propagation delay time to low output level r l = 350 ? , c l = 15 pf t phl 25 50 75 (1) ns t phl 100 ns pulse width disortion r l = 350 ? , c l = 15 pf |t phl - t plh |2.935ns propagation delay skew r l = 350 ? , c l = 15 pf t psk 840ns output rise time (10 % to 90 %) r l = 350 ? , c l = 15 pf t r 23 ns output fall time (90 % to 10 %) r l = 350 ? , c l = 15 pf t f 7ns propagation delay time of enable from v eh to v el r l = 350 ? , c l = 15 pf, v el = 0 v, v eh = 3 v t elh 12 ns propagation delay time of enable from v el to v eh r l = 350 ? , c l = 15 pf, v el = 0 v, v eh = 3 v t ehl 11 ns
www.vishay.com for technical questions, contact: optocoupleranswe rs@vishay.com document number: 84732 4 rev. 1.5, 08-apr-11 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 6n137, vo2601, vo2611, vo2630, vo2631, vo4661 vishay semiconductors high speed optocoupler, single and dual, 10 mbd fig. 1 - single cha nnel test ci rcuit for t plh , t phl , t r and t f fig. 2 - dual channel test circuit for t plh , t phl , t r and t f fig. 3 - single cha nnel test circuit for t ehl , and t elh notes (1) for 6n137 and vo2630 (2) for vo2601 and vo2631 (3) for vo2611 and vo4661 common mode transient immunity parameter test condition symbol min. typ. max. unit common mode transient immunity (high) |v cm | = 10 v, v cc = 5 v, i f = 0 ma, v o(min.) = 2 v, r l = 350 ? , t amb = 25 c (1) |cm h | 100 v/s |v cm | = 50 v, v cc = 5 v, i f = 0 ma, v o(min.) = 2 v, r l = 350 ? , t amb = 25 c (2) |cm h | 5000 10 000 v/s |v cm | = 1 kv, v cc = 5 v, i f = 0 ma, v o(min.) = 2 v, r l = 350 ? , t amb = 25 c (3) |cm h | 15 000 25 000 v/s |v cm | = 10 v, v cc = 5 v, i f = 7.5 ma, v o(max.) = 0.8 v, r l = 350 ? , t amb = 25 c (1) |cm l | 100 v/s |v cm | = 50 v, v cc = 5 v, i f = 7.5 ma, v o(max.) = 0.8 v, r l = 350 ? , t amb = 25 c (2) |cm l | 5000 10 000 v/s |v cm | = 1 kv, v cc = 5 v, i f = 7.5 ma, v o(max.) = 0.8 v, r l = 350 ? , t amb = 25 c (3) |cm l | 15 000 25 000 v/s 1 2 3 4 8 7 6 5 18964-2 the probe and jig capacitances are included in c input i f output v o i f 0 ma v ol 1.5 v t phl t plh v oh c = 15 pf gnd 0.1 f bypass v cc v out v cc i f r r l inpu ti f monitoring node output v o monitoring node l single channel pulse gen. z = 50 t= t = 5 ns o f r m l = 7.5 ma i f = 3.75 ma v e 1 2 3 4 8 7 6 5 gnd v cc pulse gen. z= 50 t= t =5n s o f r input monitoring node dual channel output v monitoring node o i f r m r l c l =1 5p f 0.1 f bypass 18963-5 v cc 1 2 3 4 8 7 6 5 18975-2 the probe and jig capacitances are included in c inpu tv e output v o t ehl t elh c = 15 pf gnd 0.1 f bypass v cc v out v cc i f r l output v o monitoring node l single channel pulse gen. z = 50 t= t = 5 ns o f r l 7.5 ma input v monitoring node e 3 v 1.5 v 1.5 v v e
document number: 84732 for technical questions, contact: optocoupleranswe rs@vishay.com www.vishay.com rev. 1.5, 08-apr-11 5 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 6n137, vo2601, vo2611, vo2630, vo2631, vo4661 high speed optocoupler, single and dual, 10 mbd vishay semiconductors fig. 4 - single channel test circui t for common mode transient immunity fig. 5 - dual channel test circui t for common mode transient immunity note ? as per iec 60747-5-5, 7.4.3.8.1, this optoco upler is suitable for safe electrical in sulation only within the safety ratings . compliance with the safety ratings shall be ensured by means of prodective circuits. safety and insulation ratings parameter test condition symbol min. typ. max. unit climatic classification accord ing to iec 68 part 1 55/100/21 comparative tracking index cti 175 399 peak transient overvoltage v iotm 8000 v peak insulation voltage v iorm 890 v safety rating - power output p so 500 mw safety rating - input current i si 300 ma safety rating - temperature t si 175 c creepage distance standard dip-8 7 mm clearance distance standard dip-8 7 mm creepage distance 400 mil dip-8 8 mm clearance distance 400 mil dip-8 8 mm insulation thickness, reinfo rced rated per bsi 60950 0.2 mm v cm (peak) switch at a: i f switch at a: v o (min. v o (max.) 0 v 5 v v cm v o v o 0.5 v cm h cm l 1 2 3 4 8 7 6 5 18976-2 gnd 0.1 f bypass v cc v out v cc r l output v o monitoring node + - v cm single channel b a v ff i f pulse generator z = 50 o v e ) = 0 ma i f = 7.5 ma 1 2 3 4 8 7 6 5 18977-1 gnd 0.1 f bypass v cc r l output v o monitoring node + - v cm b a v ff i f pulse generator z = 50 o dual channel v cc
www.vishay.com for technical questions, contact: optocoupleranswe rs@vishay.com document number: 84732 6 rev. 1.5, 08-apr-11 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 6n137, vo2601, vo2611, vo2630, vo2631, vo4661 vishay semiconductors high speed optocoupler, single and dual, 10 mbd typical characteristics (t amb = 25 c, unless otherwise specified) fig. 6 - forward voltage vs. ambient temperature fig. 7 - forward voltage vs. forward current fig. 8 - reverse current vs. ambient temperature fig. 9 - low level supply cu rrent vs. ambient temperature fig. 10 - high level supply current vs. ambient temperature fig. 11 - input threshold on current vs. ambient temperature 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 - 40 - 20 0 20 40 60 80 100 t amb - ambient temperature (c) 17610 i f = 50 ma i f = 10 ma i f = 20 ma i f = 1 ma v f - forward voltage (v) 1.10 1.15 1.20 1.25 1.30 1.35 1.40 1.45 1.50 1.55 1.60 0101520253035404550 i f - forward current (ma) 17611 v f - forward voltage (v) 5 0 1 2 3 4 5 6 7 - 40 - 20 0 20 40 60 80 100 i r - reverse current (na) t amb - ambient temperature (c) 17613-1 v r = 5 v 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 - 40 - 20 0 20 40 60 80 100 i cci - low level supply current (ma) t amb - ambient temperature (c) 17614 v cc = 5 v i f = 10 ma i f = 10 ma v cc = 7 v 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 - 40 - 20 0 20 40 60 80 100 i cch - high level supply current (ma) t amb - ambient temperature (c) 17615 v cc = 7 v i f = 0.25 ma v cc = 5 v i f = 0.25 ma 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 - 40 - 20 0 20 40 60 80 100 i th - input threshold on current (a) t amb - ambient temperature (c) 17616 r l = 350 r l = 4 k r l = 1 k
document number: 84732 for technical questions, contact: optocoupleranswe rs@vishay.com www.vishay.com rev. 1.5, 08-apr-11 7 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 6n137, vo2601, vo2611, vo2630, vo2631, vo4661 high speed optocoupler, single and dual, 10 mbd vishay semiconductors fig. 12 - input threshold off current vs. ambient temperature fig. 13 - low level output vo ltage vs. ambient temperature fig. 14 - low level output current vs. ambient temperature fig. 15 - high level output current vs. ambient temperature fig. 16 - output voltage vs. forward input current fig. 17 - propagation delay vs. ambient temperature 2.0 2.1 2.2 2.3 2.4 2.5 2.6 - 40 - 20 0 20 40 60 80 100 i th - input threshold off current (a) t amb - ambient temperature (c) 17617 r l = 350 r l = 4 k r l = 1 k 0.00 0.05 0.10 0.15 0.20 0.25 0.30 - 40 - 20 0 20 40 60 80 100 v ol - low level output voltage (v) t amb - ambient temperature (c) 17618 i l = 6 ma i l = 10 ma i l = 13 ma i l = 16 ma v cc = 5.5 v i f = 5 ma 0 10 20 30 40 50 60 - 40 - 20 0 20 40 60 80 100 i ol - low level output current (ma) t amb - ambient temperature (c) 17619 i f = 5 ma i f = 10 ma 0 5 10 15 20 25 30 35 40 45 50 - 40 - 20 0 20 40 60 80 100 i oh - high level output current (na) t amb - ambient temperature (c) 17620 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 0 v o - output voltage (v) i f - forward input current (ma) 17621 r l = 350 5 4 3 2 1 r l = 1 k r l = 4 k 0 20 40 60 80 100 120 - 40 - 20 0 20 40 60 80 100 t amb - ambient temperature (c) 17622 t p - propagation delay time (ns) t plh , 4 k t plh , 1 k t plh , 350 t phl , 350 t phl , 1 k t phl , 4 k
www.vishay.com for technical questions, contact: optocoupleranswe rs@vishay.com document number: 84732 8 rev. 1.5, 08-apr-11 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 6n137, vo2601, vo2611, vo2630, vo2631, vo4661 vishay semiconductors high speed optocoupler, single and dual, 10 mbd fig. 18 - propagation delay vs. forward current fig. 19 - pulse width distortion vs. ambient temperature fig. 20 - pulse width distortion vs. forward current fig. 21 - rise and fall time vs. ambient temperature fig. 22 - rise and fall time vs. forward current fig. 23 - enable propagation delay vs. ambient temperature 0 20 40 60 80 100 120 5111315 i f - forward current (ma) 17623 t p - propagation delay time (ns) t plh , 4 k 9 7 t plh , 1 k t plh , 350 t phl , 350 t phl , 1 k t phl , 4 k 0 10 20 30 40 50 - 40 - 20 0 20 40 60 80 100 t amb - ambient temperature (c) 17624 pwd - pulse width distortion (ns) r l = 4 k r l = 1 k r l = 350 0 10 20 30 40 50 60 5111315 i f - forward current (ma) 17625 pwd - pulse width distortion (ns) r l = 4 k 9 7 r l = 1 k r l = 350 0 50 100 150 200 250 300 - 40 - 20 0 20 40 60 80 100 t amb - ambient temperature (c) 17626 t r, f - rise and fall time (ns) t r , r l = 4 k t f , r l = 350 t f , r l = 1 k t f , r l = 4 k t r , r l = 1 k t r , r l = 350 0 50 100 150 200 250 300 5111315 i f - forward current (ma) 17627 t r, f - rise and fall time (ns) t r , r l = 4 k 9 7 t r , r l = 1 k t r , r l = 350 t f , r l = 350 t f , r l = 1 k t f , r l = 4 k 0 10 20 30 40 50 60 - 40 - 20 0 20 40 60 80 100 t amb - ambient temperature (c) 17628 t e - enable propagation delay (ns) t elh = 4 k t elh = 350 t ehl = 350 t ehl = 4 k t elh = 1 k t ehl = 1 k
document number: 84732 for technical questions, contact: optocoupleranswe rs@vishay.com www.vishay.com rev. 1.5, 08-apr-11 9 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 6n137, vo2601, vo2611, vo2630, vo2631, vo4661 high speed optocoupler, single and dual, 10 mbd vishay semiconductors package dimensions in millimeters package marking notes ? option 1 and vde logos are only marked on option 1 parts. ? tape and reel suffix (t) is not part of the package marking. i178006 pin one id 6.645 0.165 9.77 0.14 0.95 0.19 4 typ. 2.54 typ. 10 3 to 9 7.62 typ. 0.51 0.05 0.25 0.05 3.045 0.255 3.555 0.255 0.70 0.19 6.095 0.255 4 3 2 1 0.79 1.27 5 6 7 8 iso method a 8 min. 0.51 1.02 7.62 ref. 9.53 10.03 0.25 typ. 0.102 0.249 15 max. option 9 0.35 0.25 10.16 10.92 7.8 7.4 10.36 9.96 option 6 8 min. 7.62 typ. 4.6 4.1 8.4 min. 10.3 max. 0.7 option 7 18450 21764-44 vo2601 v yww h 68 x017
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
